MB10E And MB10F

This article will introduce the parameters of two electronic component products, namely MB10E and MB10F. MB10E is a bridge rectifier suitable for DC output of AC power sources, with characteristics such as high efficiency and low leakage current; MB10F is a fast recovery diode suitable for reverse protection and rectification in high-frequency circuits, with characteristics such as fast recovery time and low reverse leakage current.

MB10E parameter introduction

 

MB10E is a bridge rectifier with the following main parameters:

1. Maximum forward voltage: 1000V

2. Maximum reverse voltage: 1000V

3. Maximum forward current: 1A

4. Maximum reverse current: 5uA

5. Working temperature range: -55 ℃~+150 ℃

 

6. Packaging form: DIP-4

 

MB10E is suitable for DC output of AC power sources and has characteristics such as high efficiency and low leakage current. When using, it is necessary to pay attention to the limits of its maximum forward current and maximum reverse current to avoid exceeding its rated value and causing damage. In addition, the MB10E has a wide operating temperature range and can adapt to the needs of different environments.

Introduction to MB10F parameters

 

MB10F is a fast recovery diode with the following main parameters:

 

1. Maximum forward voltage: 1000V

2. Maximum reverse voltage: 1000V

3. Maximum forward current: 1A

4. Maximum reverse current: 5uA

5. Fast recovery time: 50ns

6. Packaging form: DO-214AC

 

MB10F is suitable for reverse protection and rectification in high-frequency circuits, with characteristics such as fast recovery time and low reverse leakage current. When using, it is necessary to pay attention to the limits of its maximum forward current and maximum reverse current to avoid exceeding its rated value and causing damage. In addition, the fast recovery time of MB10F is relatively short, which can meet the demand for fast response in high-frequency circuits.

 

This article introduces the parameters of two electronic component products, namely MB10E and MB10F. MB10E is a bridge rectifier suitable for DC output of AC power sources, with characteristics such as high efficiency and low leakage current; MB10F is a fast recovery diode suitable for reverse protection and rectification in high-frequency circuits, with characteristics such as fast recovery time and low reverse leakage current. When using these two products, it is necessary to pay attention to the limitations of their maximum forward current and maximum reverse current to avoid exceeding their rated value and causing damage