The difference between Bridge Diode MB10F and Bridge Diode MB10S

The packaging of MB10F is MBF-4 (SOP-4); The packaging of MB10S is MBS-4 (SOP-4)

SOP refers to patches, and the difference in their encapsulation lies in the meaning of the letters "F" and "S". The appearance of the two models is as follows. Let's take a closer look at the differences in packaging between these two models.

The specific dimensions of these two models are:

The MB10S model has a foot spacing of 2.5mm, an overall length of 4.7mm, a height of 2.5mm, a thickness of 1.1mm, a body width of 4.0mm, and a foot thickness of 0.25mm; The MB10F model has a foot spacing of 2.5mm, an overall length of 4.7mm, a height of 1.5mm, a thickness of 0.6mm, a body width of 4.0mm, and a foot thickness of 0.25mm

After comparing the two, we can see the differences between the two: the height of the MB10S bridge stack is 2.5mm, while the height of the MB10F bridge stack is 1.5mm

The thickness of MB10S is 1.1mm, and the thickness of MB10F is 0.6mm. Therefore, it is concluded that the parameters of the two rectifier bridges are the same, but MB10F is thinner and smaller than MB10S, which is suitable for products with high volume requirements for rectifier bridges